Muratec MFX-1600, MFX-1200 P2Machine Settings → /Enter, Programming a document storage operation

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

6	Press ENTER. The LCD asks which list you want to program into the program-
	mable one-touch:
		P2:Machine Settings
		←	/→ /Enter
7	Press		until the list you want appears.
8	Press ENTER.
9	Press STOP to return your machine to standby mode.

Advanced features

Programming a document storage operation

If you want to program a programmable one-touch key to store an F-Code polling document, two things must be true:

The F-Code bulletin box must exist on your fax machine.

You must know the F-Code bulletin box s two-digit number (01-50) and name.

To program your programmable one-touch to store a regular polling document or F-Code polling document:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was to store a document and you want to keep this key programmed to store a document, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for exam- ple), then you first must erase the stored command before programming the new one.

3

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication

←/→ /Enter

Note: If changing a previously stored command, skip to step 7.

3.47