Muratec MFX-1600 Changing the copy auto reset time, Setting copy auto, Setting Negative/Positive

Changing the copy auto reset time

Default setting: 3 minutes.

The machine returns to its initial condition automatically after a certain period of time. You can change this time from 1 to 10 minutes.

1 Press Program key, B, 3, 0, 3, ENTER.

Auto Reset Time (01-10):03

2 Use the numeric keypad to enter the time you want for the copy auto reset. Here, we ve chosen ten minutes.

Auto Reset Time (01-10):10

Note: Enter a leading zero when entering a quantity less than 10.

3 Press ENTER to save the setting.

Setting copy auto

Default setting: Auto is set for Recording paper size

The machine automatically selects the recording paper size according to the docu- ment size and enlargement/reduction rate. You can change it to select the document size or enlargement/reduction rate automatically, instead of the recording paper size.

1 Press Program key, B, 3, 0, 4, ENTER. The LCD asks you to select the item you want to set to Auto:

Copy Auto:Paper Size

←/→ /Enter

2	Press or until the item you want appears. In this example, we ve chosen
	Document size.

Copy Auto:Doc. Size

←/→ /Enter

3 Press ENTER to save the setting.

Changing the default settings

Setting Negative/Positive

Default setting: Off

If you frequently use the Negative/Positive (reversing black and white areas), you can set it to on for default setting by following procedure.

1	Press Program key, B, 3, 0, 7, ENTER.
		Nega/Posi		:Off
		←	/→	/Enter
2	Press or			until the setting you want appears.
	In this example, we ve chosen On.
		Nega/Posi		:On
		←	/→	/Enter
3	Press ENTER to save the setting. The machine returns to the standby mode
	with following display:
		Copy <Nega/Posi> 1
		Ltr	[ Ltr ] 100%

Setting combine

Default setting: Off

Note: This feature is available only for the MFX-1600 model.

If you frequently use the combine feature, you can set it to on for default setting by following procedure.

1	Press Program key, B, 3, 0, 8, ENTER.
		Combine		:Off
		←	/→	/Enter
2	Press or			until the setting you want appears.
	In this example, we ve chosen On.
		Combine		:On
		←	/→	/Enter
3	Press ENTER to save the setting. The machine return to the standby mode
	with following display:
		Copy <Combine>			1
		Ltr	[ Ltr ] 100%

4.7