Muratec MFX-1600 Macro In Use, Memory Overflow, Start Or Cancel, Mirror Carriage Error, No Drum

What you see on the LCD	What it means/What to do
Macro In Use	You tried to change the function for a Soft key,
	but that Soft key has been programmed in a
	Macro key. You cannot change the Soft key func-
	tion until erase the Macro key that contains the
	Soft key you want to change. Erase the Macro
	key, then try again.
Memory Overflow	During transmission (or copying), you tried to
Start Or Cancel	enter more pages into memory than your fax
	could store. Press START to tell your fax to keep
	as many pages in memory as possible, or press
	CANCEL to delete from memory all pages stored
	during this operation (but not previous opera-
	tions).
Mirror Carriage Error	The mirror carriage of your machine has become
	inoperable. Call your authorized Muratec dealer
	or Muratec Customer Support.
Mirror Locked	The transport mode is not turned off.
	Turn off the transport mode (see page 1.8).
No Command	You pressed REVIEW COMMANDS to review
	upcoming commands, but your fax machine had
	none stored.
No Department Code	You tried to turn on the department code setting
	but there are no department codes stored in
	your fax machine. Store at least one department
	code, then try again.
	. . . or . . .
	You entered incorrect department code at fax
	sending while the department feature is on.
	Enter correct department code.
No Document Stored	You tried to print a document from memory, but
	your fax machine had none stored.
No Drum	The drum cartridge is missing or has not been
	properly installed in your fax machine.
	Please properly install the drum cartridge.
No Number Stored	You selected an autodialer, batch box or F-Code
	box number for which there is no fax (or phone)
	number programmed. Either choose another
	number or dial a phone number directly from the
	numeric keypad.

	Just in case
What you see on the LCD	What it means/What to do
No Passcode	You tried to program a security feature (see
	page 3.50), but there s no protection passcode
	stored in your fax machine. Store a protection
	passcode in your machine, then retry again.
No PIN Number	You selected Mode1 in the PIN mask feature
	and tried to call an autodialer number in which
	no PIN has been entered, or to call using
	numeric keypad without PIN. Enter a PIN, then
	try again.
No Report	You requested an activity journal or confirma-
	tion report, but your fax machine has no record
	of any fax jobs having occurred.
No Toner Cartridge	The toner cartridge is missing or has not been
	properly installed in your fax machine. Please
	properly install the toner cartridge.
Not Allowed in Macro	During macro registration, you pressed the key
	which cannot be registered in Macro, such as
	Monitor/Call key or Security Reception key.
Other Key Setting	You tried to enter the same function which is
	already stored in other Soft key.
	Store the different function.
Open Top Cover	The paper is jammed in your fax machine.
Please Remove Paper	Open the cover indicated on the LCD, and
Open 1st Side Cover	remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover	Either your document wasn t inserted correctly,
Reset Document	or the fax to which you re sending can t handle
	the document s page length. Reset the page and
	try again.
Please Call Service	The printer unit of your fax machine has become
	inoperable. Call your authorized Muratec dealer
	or Muratec Customer Support.

5.7