Muratec MFX-1200 Making copies, Your machine s copier features, Basic copy procedure, Single copy

Basic operation

Making copies

Your machine s copier features

Your machine has the following copier features: Single copy (see the right column on this page) Stacking multiple copies (see page 2.12) Sorting multiple copies (see page 2.12) Enlarged or reduced copies (see page 2.13)

Negative/positive copy (Reverse black and white areas) (see page 2.16) Combine copy (see page 2.17)

Ultra copy mode (see page 2.17)

Basic copy procedure

1	Press COPY/FAX to change to	COPY/FAX key
	Copy mode.

When the machine is in the Copy mode, the LCD shows:

Number of copies

Copy reduction or enlargement ratio

Recording paper size

Document size

Note: For details about each item, see Making copy settings, page 2.15

2 Place your original document in ADF face up, or on the FBS glass face down just as you would to send a fax.

3 Enter the document size by pressing the DOCUMENT SIZE.

4 As needed, set the following:

Select document type and adjust image contrast Enter the number of copies

Set copy reduction or enlargement ratio

Note: For details about each item, see Making copy settings, page 2.15.

5 Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

Single copy

1	Press COPY/FAX to change to Copy mode.
2	Place your original document in ADF face up, or on the FBS glass face
	down just as you would to send a fax.
3	If you are using FBS glass, enter the document size by pressing the
	DOCUMENT SIZE.
4	As needed, set the following:
	Select document type and adjust image contrast
	Set copy reduction or enlargement ratio
	Note: If you want to enlarge copy, use the FBS glass.
5	Press START.

2.12