Philips 272P4  , Inf and .icm?, Computer may ask you for monitor, Ans Surface?, Ans Monitor?

10.Troubleshooting & FAQs

‡ In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 2560 x 1440 pixels.

‡ Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK.

‡ Restart your computer and repeat step 2 and 3 to verify that your PC is set at 2560 x 1440 @ 60 Hz.

‡ Shut down your computer, disconnect your

old monitor and reconnect your Philips monitor.

‡ Turn on your monitor and then turn on your PC.

Q2: What is the recommended refresh rate for monitor?

Ans.: Recommended refresh rate in monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.

4	:KDWDUHWKHLQIDQGLFPÀOHVRQWKH
	CD-ROM? How do I install the drivers
	(.inf and .icm)?
Ans.: 7KHVHDUHWKHGULYHUÀOHVIRU\RXU
	monitor. Follow the instructions in your
	user manual to install the drivers.Your
	computer may ask you for monitor
	GULYHUVLQIDQGLFPÀOHVRUDGULYHU
	GLVNZKHQ\RXÀUVWLQVWDOO\RXUPRQLWRU
	Follow the instructions to insert the
	companion CD-ROM included in this
	package. Monitor drivers (.inf and .icm
	ÀOHVZLOOEHLQVWDOOHGDXWRPDWLFDOO\
Q4:	How do I adjust the resolution?
Ans.:	Your video card/graphic driver and
	monitor together determine the
	available resolutions.You can select the
	desired resolution under Windows®

Control Panel with the "Display properties".

Q5:	What if I get lost when I am making
Ans.:	monitor adjustments via OSD?
	Simply press the		button, then select
	[Reset to recall all the original factory
	settings.
Q6:	Is the monitor screen resistant to
Ans.:	scratches?
	In general it is recommended that
	the panel surface is not subjected to
	excessive shocks and is protected from
	sharp or blunt objects.When handling
	the monitor, make sure that there is
	no pressure or force applied to the
	panel surface side.This may affect your
	warranty conditions.
Q7:	How should I clean the monitor
Ans.:	surface?
	For normal cleaning, use a clean, soft
	cloth. For extensive cleaning, please use
	isopropyl alcohol. Do not use other
	solvents such as ethyl alcohol, ethanol,
	acetone, hexane, etc.
Q8:	Can I change the color setting of my
Ans.:	monitor?
	Yes, you can change your color setting
	through OSD control as the following
	procedures:
‡ Press		button to show the OSD (On
Screen Display) menu

‡ Press ɾ button to select the option

[Color] then press button to enter color setting, there are three settings as below.

1.Color Temperature:The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K.With settings in the 5000K range the panel appears "warm, with a red-white color tone", while a 11500K temperature yields "cool, bluewhite toning".

2.sRGB:This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital

47