2. Setting up the monitor
Note
When you do the SWAP function, the video and its audio source will swap at the same time. (Refer to page 7 “Independent audio playback, regardless of video input” for more detail.)
2.4Remove the Base Assembly for VESA Mounting
Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.
1.Extend the monitor base to its maximum height.
3.While keeping the release button pressed, tilt the base and slide it out.
Note
This monitor accepts a 100mm x 100mm
100mm |
100mm |
2.Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.Then lift the monitor stand.
12
