Muratec MFX-1200, MFX-1600 manual Caring for your fax machine, Cleaning tips, Corrective cleaning

Just in case

Caring for your fax machine

With proper installation and a little maintenance, your fax machine should give you dependable service for years to come.

Although it requires little day-to-day care, you can take these simple precautions to keep it in top form:

Always make sure your fax machine is installed according to our specifications, including using an electrical surge suppressor. (If necessary, review Pick an installation spot, page 1.5.)

Always use good, copier-quality paper.

Always clean your fax machine as needed (see Cleaning tips, below).

Never install your fax machine where it can overheat, gather dust or get splashed by any liquids (even water).

Cleaning tips

Some things to keep in mind about cleaning your fax machine:

Do clean it! Dust and dirt, especially around the fax machine s air vents can shorten your machine s life.

Always unplug the fax machine before you clean it.

Never spray any cleaner DIRECTLY onto your fax machine. The drifting spray could damage components inside.

Never try to clean SEALED areas inside your fax machine. They re sealed to protect your safety and the machine.

For cleaning external surfaces, such as the cover and handset: use a mild clean- ing solution sprayed onto a lint-free towel or cloth.

Always use a lint-free cloth (or swabs) moistened with alcohol to gently wipe components inside your machine.

In areas you can t reach with swabs, always use dry, dust-free compressed air to gently blow away dust and other material.

Corrective cleaning

Here are some simple cleaning procedures for keeping your fax machine operating smoothly. Use each as the need arises.

Curing frequent jams in the ADF

If you re having trouble with getting your original documents to feed properly, try this procedure:

1	Turn off your fax machine.
2	Get two soft, lint-free cloths and moisten them as follows:
	One with a cleaner suitable for use on platen/rubber rollers. In steps 4 and
	6, we ll call this the rollers cleaner.
	The other with isopropyl alcohol
3	Open the scanner cover by holding the scanner cover release.
	Important: You must hold the cover open. It won t stay open by itself.
4	Use the cloth with the rollers cleaner to clean the face of the rollers. Rotate
	the rollers by hand to allow cleaning of the entire roller surface.

5.12