Muratec MFX-1200, MFX-1600 EasyStart Initial settings, Getting started, Clearing stored settings

Getting started

EasyStart (Initial settings)

EasyStart software is already installed on your Muratec fax machine. It guides you through the process of entering your machine s settings.

These settings you make here can always be changed later.

Getting started

Determine the following before you go any further:

1	The type of dialing your telephone system requires Choose either tone or
	pulse (rotary) dialing.
2	The name and fax number you want to appear on your faxes
	Every fax page you send arrives at the receiving machine with a single line of

text at the very top of the page. This text lists a name, called the Transmit Terminal Identifier (TTI), and a fax number. The TTI cannot be longer than 22 characters.

Clearing stored settings

Before using EasyStart, clear your machine s built-in user data memory. This ensures the memory will hold only your settings.

Important: After you use EasyStart, do not clear the memory again unless an authorized technician asks you to do so.

To clear the machine s memory:

1 Press Program key, *, 2. The LCD now asks if you want to clear the memory:

Clear User Settings

Check Enter/Cancel

Note: If you don t want to clear the memory, just press CANCEL.

2 If you do want to clear the memory, press ENTER.

Entering initial settings

Important: If you press STOP during EasyStart, your fax machine returns to standby mode (its normal condition). But it will keep the settings you saved by pressing ENTER as described in these instructions.

1 Press Program key, I, ENTER.

The LCD shows the current language setting.

Language :English

←/→ /Enter

2	Press or		until the language you want appears.
3	Press ENTER to save the setting and continue EasyStart.
4	The LCD now shows the current calendar/clock setting, with a cursor appear-
	ing under the first digit.
		Enter Time
		01/01	01 00:00
5
	Use the numeric keypad to enter the correct date and time, using a MMDDYY
	format for the date and 24-hourformat for the time. For instance, to set 8:30
	PM on June 11, 2000, press 0 6 1 1 0 0 2 0 3 0, which results in:
		Enter Time
		06/11	00 20:30

Note: Your fax machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

To change a digit, press to move the cursor left, or to move it right. Then enter the correct digit.

6 Press ENTER to save the clock setting and continue.

1.18