Muratec MFX-1200 Programming printouts, Select Program No P2No Number Stored P1Machine Settings

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

Advanced features

13	Press ENTER. The LCD asks if you want to turn the Fax & Copy feature on or
	off for this programmable one-touch number.
		Fax & Copy		:---
		←	/→	/Enter
14	Press until the mode you want appears.
15	Press ENTER.
16	Press STOP to return your machine to standby mode.

Programming printouts

To program a programmable one-touch key to print a list:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for printing a list of the machine settings, you will see:

Select Program No.

P1:Machine Settings

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for printing a list and you want to keep this key programmed for printing a list, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for exam- ple), then you first must erase the stored command before programming the new one.

3

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication

←/→ /Enter

Note: If changing a previously stored command, skip to step 7.

5 Press until List Print appears.

Type :List Print ← /→ /Enter

3.46