Muratec MFX-1600, MFX-1200 manual Programming a batch transmission, Batch Tx Enter Box No, Contrast

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

Programming a batch transmission

For this operation to work, two things must be true:

The batch box you re using must exist on your fax machine. You must know the batch box s identifier number (1 5).

To program a batch transmission into a programmable one-touch key:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for a batch transmission and you want to keep this key programmed for a batch transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before pro- gramming the new one.

3

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication

←/→ /Enter

Note: If changing a previously stored command, skip to step 7.

Advanced features

5 Press until Communication appears.

Type :Communication

←/→ /Enter

6	Press ENTER, ADVANCED FUNCTIONS five times and then press ENTER. The LCD
	shows:
		Batch Tx
		Enter Box No.				:_
7
	Use the numeric keypad to enter the one-digit identifier for the batch box you
	want to assign to this one-touch key. Here, we ve entered 5:
		Batch Tx
		Enter Box No.				:5
	Note: To change an identifier already entered, press CANCEL to erase it.
		Then re-enter the correct identifier.
8	Press ENTER. The LCD asks if you want to make additional settings for this
	programmable one-touch number.
		Option		/→	:Off
		←			/Enter
	If you do not want to make additional settings, press ENTER. Skip to step 16.
	If you do want to make additional settings, press and ENTER.
9	The LCD asks which resolution you want to use for this programmable one-
	touch number.
		Resolution			:-----
		←		/→	/Enter
10	Press		until the mode you want appears.
	Note: For any of the following settings, choose ----- if you do not want to
		specify the displayed setting for this programmable one-touch key.
11	Press ENTER. The LCD asks you to select a contrast mode for each programma-
	ble one-touch number.
		Contrast			:-------
			←	/→	/Enter
12	Press		until the mode you want appears.

3.45