Just in case

If a printout jams inside your machine

To clear a printout jammed inside your machine:

Important: Be careful not to put your hand between the top cover and the machine.

1 Open the top cover.

2 Open the printer cover.

3 Remove the toner and drum cartridge. Important: Shield the drum cartridge

from light, especially strong light. Later, if you have to remove the car- tridge from the fax, immediately wrap it in a thick cloth to protect it from light.

4 Remove the jammed paper. Important: The fuser unit becomes

very hot.

Do not touch the fuser unit when you are remov- ing a paper jam.

Note: Avoid getting unfixed toner on your hands and clothes.

Open the side cover.

Pulling up the jam release lever to remove the jammed paper.

5 Reset the toner and drum cartridge.

6 Gently close the printer cover, pressing firmly on the both sides of the printer cover until you hear it click.

7 Gently close the top cover, pressing firmly on the both sides of the top cover until you hear it click.

5.2

Page 114
Image 114
Muratec MFX-1200, MFX-1600 manual If a printout jams inside your machine