Muratec MFX-1200 manual Hang Up Phone, Relay Box, Secure Box, Use in P OneTouch, Invalid I.D. Code

Just in case
What you see on the LCD	What it means/What to do
Document Full	You tried to enter an document into an F-Code
	box, but the machine has reached its capacity
	(30 documents). Delete documents stored in
	F-Code boxes until the machine will let you pro-
	ceed.
Document Jam	An original document jam while you are using
ContStor Enter/Cancl	the ADF for either faxing or copying. See page
	5.1 for instructions on clearing the jam.
Document Stored	You tried to erase a batch box which contains at
	least one document. Erase the document(s), then
	try again.
Enter No. (0-32)	You tried to enter a call group number greater
	than 32. Your machine can maintain 32 call
	groups, numbered 1-32 (call group 0 covers all
	the groups). Determine the correct call group
	identifier number and enter it, instead.
Enter No. (000-255)	If the optional NIC (network interface card) is
	attached to your machine, and you tried to enter
	a TCP/IP address greater than 255.
	Enter the correct TCP/IP address.
Enter Reduce/Enlarge	You tried to copy your document on the paper
	other than Letter, Legal or Half letter sized
	paper using the bypass tray, or the calculated
	reduction or enlargement ratio is out of the
	acceptable range (50 200 %) when the copy
	reduction or enlargement ratio is set to Auto .
	Enter the reduction or enlargement ratio manu-
	ally although a part of the image might be
	lacked, or change the paper for copying.
Enter Scan Size	When you using the FBS (Flatbed scanner)
	glass, you must manually enter the scan size of
	your document. Press DOCUMENT SIZE to choose
	the size.
Feeder In Use	The command you re trying to enter requires the
	use of the ADF, which is already in use. Wait for
	the machine to stop using the ADF, then try
	again.

What you see on the LCD	What it means/What to do
Hang Up Phone	The optional handset is off-hook.
	Hang it up, making sure the upper part of the
	handset presses down on the hook button.
In Relay Box	You tried to store a document for polling in an
	F-Code box which is set to be a relay box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Secure Box	You tried to store a document for polling in an
	F-Code box which is set to be a security box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Use in P OneTouch	You tried to erase the F-Code box or Batch box,
	which is programmed in the programmable one-
	touch key.
	Erase the programmable one-touch key that con-
	tains the F-Code box or Batch box you want to
	erase, then try again.
Invalid I.D. Code	The F-Code box I.D. code you entered isn t valid.
	Try re-entering your F-Code box I.D. code.
Invalid Number	You pressed a key which has no function during
	the current operation.
Invalid Paper Size	If the optional printer controller is attached to
	your machine, it can use the special sized paper
	with the bypass tray. However, it should be used
	only for the PC printing, it cannot be used for
	copying. So, if you tried to copy onto the special
	sized paper with bypass tray, this message will
	appear.
Invalid Passcode	The protection passcode you entered isn t valid.
	Repeat the operation, entering the correct protec-
	tion passcode.
Line Busy	You tried to erase a document which someone is
	polling from your machine. Wait for the fax to
	complete the polling operation, then try again.

5.6