Muratec MFX-1600, MFX-1200 Enter Fax Number Select BlockJunk No 01555-2971, Block Junk FaxMode2

4 Depending on if you have already entered at least one number into the blocked numbers list, the LCD shows one of the following:

		Enter Fax Number	or	Select BlockJunk No.
		01:_		01:555-2971
5	If you want to modify an existing entry in the blocked numbers list, press
	or until you see the number you want to modify.

o r

If you want to enter a new number in an already-started blocked numbers list, press or until you find an empty position in the list.

Then press ENTER to enter or modify the blocked number.

Note: To clear a number from the list, see Clearing a number from the blocked numbers list, right column.

6 Use the numeric keypad to enter the last eight characters of a fax number you want to block. For example, if you want to block a fax from someone with a Subscriber ID of 972-555-3038,you should enter 5, 5, 5, DIALING OPTIONS, 3, 0, 3, 8:

Enter Fax Number 01:555-3038_

To change a specific digit, press to move left or to move right until the cursor is under the digit, then use the numeric keypad to enter the correct number.

7 Press ENTER to save the setting. The LCD shows the next slot in the blocked

numbers list.

If you do not want to enter or change a number for this slot, go on to step 8. If you do want to enter or change a number for this slot, repeat steps 5 7.

8 Press STOP. Your machine will return to standby mode.

Advanced features

Clearing a number from the blocked numbers list

To clear a number from the list:

1 Press Program key, B, 2, 1, 0, ENTER.

If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.

Block Junk Fax:Off

←/→ /Enter

2	Press		or	until you see your preference, Mode2 or Mode3.
		Block Junk Fax:Mode2
			← /→	/Enter
3	Press ENTER. The LCD shows:
		Select BlockJunk No.
		01:555-2971
4
	Press		or	until you see the number you want to clear.
5	Press CANCEL to clear the number.
	To clear another number from the blocked numbers list, repeat steps 4 5.
	Otherwise, go on to step 6.
6	Press STOP to return your machine to standby mode.

Printing a list of the blocked numbers

Forgot which number is stored in the blocked number list? Just print a list of the blocked numbers.

To print a list of the blocked numbers, press Program key, E, 1, 1, 0, ENTER.

3.55