Muratec MFX-1600, MFX-1200 manual Sec. Rx Active, Security Rx Doc Enter Passcode

Models: MFX-1200 MFX-1600

1 142
Download 142 pages 32.92 Kb
Page 91
Image 91

6 If you want security reception to begin now (and at this same time every day), skip to step 8.

Otherwise, go on to step 7.

7 Use the numeric keypad to enter the time (use a 24-hour format) when secu- rity reception should begin every day. Type over the numbers displayed. Here, we ve entered 17:35:

Security Rx

Enter Time: 17:35

To change a digit, press to move to the left, or to move right. Then enter the correct digit.

8 Press ENTER to save the setting.

Helpful tip: After setting for activating the security reception, you can assign the security reception to the Soft key (see page 3.17) to turn it on and off. Turning on the security reception by pressing a Soft key is not effected the time setting you entered at step 7. It begins the security reception immediately.

To turn the security reception on by pressing a soft key:

1

Program a Soft key for security reception. (See page 3.17.)

2

Press a Soft key that is assigned for security reception.

 

 

Enter Passcode :****

 

3

 

 

 

Enter the protection passcode and then press ENTER.

 

The LCD briefly shows following and the LED of the Soft key will light and the

security reception begins immediately.

** Sec. Rx Active **

Note: To turn the security reception off, see Printing from security reception/Turning off security reception, next column.

Advanced features

Printing from security reception / Turning off security reception

When security reception is on, an incoming fax goes directly into your machine s memory and the MEMORY RECEIVE light comes on. But the incoming fax message is not printed.

To retrieve the faxes received during this security reception (and to return your machine to normal reception until the next time):

1 Press Program key, D, 3, 0, 4, ENTER

If you using the Soft key, press the Soft key instead of this operation. In which way, the LCD shows:

Security Rx Doc.

Enter Passcode :****

2 Use the numeric keypad to enter the passcode. Here we ve entered 6296:

Security Rx Doc.

Enter Passcode :6296

3 Press ENTER.

If you ve entered the correct passcode, your fax machine will print all docu- ments in its memory and then erase them. Then it will turn security reception off until the next time you ve scheduled security reception or the Soft key which programmed security reception is pressed.

If you using the Soft key, the LED light of the Soft key will be off.

If you ve entered an incorrect passcode, your fax machine will refuse to print, and security reception remains on.

3.51

Page 91
Image 91
Muratec MFX-1600, MFX-1200 manual Sec. Rx Active, Security Rx Doc Enter Passcode, Press Program key, D, 3, 0, 4, Enter