Toshiba RD-XV48DTKF owner manual Disc Menu Language Default French DVD only

E3NG0FD_EN.book Page 87 Wednesday, January 30, 2008 10:37 AM

Dynamic Range Control (Default: ON) (DVD only)

Set to “ON” to make the dynamic range narrower.

Select a setting using [U \ D], then press [ENTER].

Dynamic Range Control

ON

OFF

Your setting is activated.

“Dynamic Range Control” function is effective only with analogue audio connection.

Note

•“Dynamic Range Control” function is available only on discs recorded in the Dolby Digital format.

PCM sampling (Default: 48kHz)

Select a setting using [U \ D], then press [ENTER].

PCM

48kHz

96kHz

Your setting is activated.

48kHz:	If your amplifier / decoder is NOT
	compatible with 96 kHz PCM, select
	“48kHz”. Sound recorded at 96 kHz is
	down sampled to 48 kHz.
96kHz:	If your amplifier / decoder is compatible
	with 96 kHz PCM, select “96kHz”. Sound
	is sampled at 96 kHz.

Note

When playing back a disc with copyright protection:

•Even if you select “96kHz”, the sound is down sampled to 48 kHz.

Dolby Digital conversion (Default: Stream)

Select a setting using [U \ D], then press [ENTER].

Dolby Digital

PCM

Stream

Your setting is activated.

PCM:	Converts the Dolby Digital into PCM
	(2 channel).
	If your amplifier / decoder is NOT
	compatible with Dolby Digital, set to
	“PCM”.
Stream:	Outputs Dolby Digital signals.
	If your amplifier / decoder is compatible
	with Dolby Digital, set to “Stream”.

Hint

When playing back a DVD-RW disc recorded in VR mode:

•If the audio source on a disc is in Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main audio (L), sub audio (R), or a combination of both (L / R) using your amplifier / decoder.

Settings for MPEG (Default: PCM) (DVD only)

Select a setting using [U \ D], then press [ENTER].

MPEG

PCM

Stream

Your setting is activated.

PCM:	Converts MPEG into PCM.
	If your amplifier / decoder is NOT
	compatible with MPEG, set to “PCM”.
Stream:	Outputs MPEG Audio signals.
	If your amplifier / decoder is compatible
	with MPEG, set to “Stream”.

Settings for DTS (Default: ON) (DVD only)

Select a setting using [U \ D], then press [ENTER].

DTS

ON

OFF

Your setting is activated.

ON:	Outputs DTS signals.
	If your amplifier / decoder is compatible
	with DTS, set to “ON”.
OFF:	No DTS signal is output.
	If your amplifier / decoder is NOT
	compatible with DTS, set to “OFF”.

3. Disc Menu Language (Default: French) (DVD only)

Set “Disc Menu Language”.

Select a setting using [U \ D], then press [ENTER].

Disc Menu Language

French

English

Spanish

German

Italian

Other

Your setting is activated.

4. Audio Language (Default: Original) (DVD only)

Set “Audio Language”.

Select a setting using [U \ D], then press [ENTER].

Audio Language

Original

French

English

Spanish

German

Italian

Other

Your setting is activated.

If “Original” is selected, the audio language is the default of the inserted disc.

EN 87

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others