Toshiba RD-XV48DTKF owner manual Connections, Connecting to a TV, 20 EN

E3NG0FD_EN.book Page 20 Wednesday, January 30, 2008 10:37 AM

Connections

Audio/Video cable (not supplied)

Scart adaptor (not supplied)

HDMI OUT

To Aerial jack

3

3

Scart/RCA cable (not supplied)

Scart cable (not supplied)

Antenna

Cable

Signal

or

2

RCA cable (supplied)

1

RCA cable (not supplied)

	Using the COMPONENT VIDEO OUT jacks
Connections	and the AUDIO OUT (L\R) jacks
	If your TV has Component Video input jacks, use a
	Component Video cable and an Audio cable (to
Connecting to a TV
	connect the AUDIO OUT (L\R) jacks).
Connect the unit to a TV after considering the	• Component connection provides the better quality
	picture.
capabilities of your existing equipment.
	3 Connect the COMPONENT VIDEO
Before installation, unplug your TV and this
	OUT jacks of this unit to the
unit.
	Component Video input jacks of your
1 Connect the antenna or cable to the	TV. Use a commercially available
ANTENNA IN jack of this unit.	Component video cable.
2 Connect the ANTENNA OUT jack of	4 Connect the AUDIO OUT (L\R) jacks
this unit to the Aerial jack of your TV.	of this unit to the analogue Audio
Use the supplied RF cable.	input jacks of your TV. Use a
Using the Scart socket	commercially available Audio cable.
	AUDIO IN	Component
3 Connect AV1 (TV) Scart socket of		Video IN
			Y PB/CB PR/CR
this unit to the Scart socket of your	Audio cable	Component
TV. Use a commercially available
	(not supplied)	Video Cable
Scart cable.		(not supplied)

Note

•If your TV does not have a Scart socket, use a commercially available Scart adaptor or Scart/RCA cable to connect.

•Connect this unit directly to the TV. If the AV cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•When changing the “Video Out” setting (“SCART (RGB)”, “Component (Interlace)” or “Component (Progressive)”), connect to the corresponding jack on the TV. If the setting is changed, for example, to “Component (Interlace)” or “Component (Progressive)” while the scart cable is connected to the TV, a distorted video signal may be output.

HDMI OUT

•After you have made the connections, set the “Video Out” setting. (See page 90.)

20 EN