Toshiba RD-XV48DTKF

Playback

1Press [BON\STANDBY] to turn on

the unit.

To play back a tape, turn on the TV and be sure to

select the input to which the unit is connected.

2Press [VCR].

3Insert a pre-recorded tape, then

press [PLAYB] to begin playback.

4During playback, press [PAUSEF].

Playback will be paused and sound will be muted.

5Press [PLAYB] to resume playback.

6Press [STOPC] to stop playback.

7Press [OPEN\CLOSE A] to eject the

tape.

Note

• When a tape without record tab is inserted, the unit

will start playback automatically.

• Tracking will be automatically adjusted upon

playback. To adjust the tracking manually,

press[PROG. G\H].

Recording and One-touch Timer

Recording (OTR)

Basic Recording

Before recording, make sure:

• The desired channel is selected by pressing

[theNumber buttons ] or [PROG. G\H] on the

remote control.

• There is a tape with a record tab in the unit.

1Turn on the unit and insert a

recordable videotape.

Make sure that the TV input is set on the unit.

2Press [VCR].

3Select the recording mode using

[REC MODE].

• The desired recording mode is selected in SP

(standard play) or LP (long play) mode by

pressing [RECMODE].

4Select the desired channel to record

using [PROG.G\H] or

[the Number buttons].

5Press [REC I] to start recording.

To temporarily stop recording or to resume it,

press [PAUSEF].

After the unit has been in pause mode for 5

minutes, it will stop automatically to protect the

tape and the video head from damage.

6Press [STOPC] when th e recording

is completed.

VHS Functions

VHS

Tape speed Recording / Playback Time

Type of tape E60 E120 E180 E240

SP mode 1 hour 2 hours 3 hours 4 hours

LP mode 2 hours 4 hours 6 hours 8 hours

VHS

Introduction Connections Basic Setup Playback Editing OthersFunction SetupRecording VHS Functions

E3NG0FD_EN.book Page 93 Wednesday, January 30, 2008 10:37 AM