Toshiba RD-XV48DTKF owner manual Rear Panel, 12 EN, This unit does not have an RF modulator

E3NG0FD_EN.book Page 12 Wednesday, January 30, 2008 10:37 AM

Rear Panel

	HDMI OUT
1	2	3	4	5

6 7 8 9

1Mains cable

•Connect to a standard AC outlet.

2HDMI OUT jack (HDD/DVD)

•Connect to a display with an HDMI compatible port. Use a commercially available HDMI cable.

3DIGITAL AUDIO OUT (COAXIAL) jack (HDD/DVD)

•Connect to an amplifier with a digital input jack such as a Dolby Digital decoder, DTS decoder or MPEG decoder. Use a commercially available Coaxial cable.

4AUDIO OUT (L\R) jacks (HDD/DVD)

•Connect to the audio input jacks on your TV. Use a commercially available Audio cable.

6AV2 (DECODER) socket (HDD/DVD/VHS)

•Connect to VCR, camcorder, or other Audio-Video equipment. Use a commercially available Scart cable.

7AV1 (TV) socket (HDD/DVD/VHS)

•Connect to the Scart socket on your TV. Use a commercially available Scart cable.

8ANTENNA IN

•Connect to an antenna or a cable.

9ANTENNA OUT

•Connect to the Aerial jack on your TV, cable box or direct broadcast system to output the signal received at ANTENNA IN. Use the supplied RF cable.

5COMPONENT VIDEO OUT jacks (HDD/DVD)

•Connect to the component video input jacks on your TV. Use a commercially available Component Video cable.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

•This unit does not have an RF modulator.

12 EN