Toshiba RD-XV48DTKF owner manual Initial Setting, 24 EN, Press Enter to exit

E3NG0FD_EN.book Page 24 Wednesday, January 30, 2008 10:37 AM

Basic Setup

Initial Setting

When you turn on this unit for the first time, you need to follow these steps.

1 Press [B ON\STANDBY].

2 Turn the TV on. Select the input to which the unit is connected.

“Réglage initial” will automatically appear.

3 Select your desired language for the OSD using [U \ D]. Then press [ENTER] to go to the next step.

Réglage initial

Langue Aff. écran

Français

English

Español

Deutsch

Italiano

4 Select your desired country to the channel plan using [U \ D]. Then press [ENTER] to go to the next step.

Initial Setting

Country

France

Spain

Germany

Italy

Switzerland

5 Select your desired channel preset type using [U \ D]. Then press [ENTER].

Initial Setting

Auto Tuning

Make sure the antenna is connected to “ANTENNA IN” jack.

Digital tuning

Digital & Analog tuning

Analog tuning

The unit will start getting channels available in your area.

Digital tuning:

Only the DVB channels receivable in your area are automatically scanned and memorised.

Digital & Analog tuning:

Both analogue and DVB channels receivable in your area are scanned and memorised automatically.

Analog tuning:

Only the analogue channels receivable in your area are automatically scanned and memorised.

•If no channel has been memorised, the antenna confirmation display will appear. Press [ENTER] to start auto scanning again or press [RETURN] to cancel the initial settings.

6 After finishing channel setting, “Clock Setting” will appear. Then press [ENTER].

Clock Setting

01 / 01 / 2008 (TUE)

0 : 00

•If you want to adjust the clock, follow to step 5 on page 36 in “Manual Clock Setting”.

7 Press [ENTER] to exit.

24 EN