Toshiba RD-XV48DTKF

94 EN

Accidental erasure prevention

To prevent accidental recording on a recorded

cassette, remove its record tab. To record on it later,

cover the hole with cellophane tape.

One-touch Timer Recording

This feature allows you to set the recording length

simply by pressing [RECI].

1Turn on the unit and insert a

recordable videotape.

Make sure that the TV input is set on the unit.

2Press [VCR].

3Select the recording mode using

[REC MODE]. (See page 93.)

4Select the desired channel to record

using [PROG. G\H] or

[the Number buttons].

5Press [REC I] repeatedly until the

desired recording time (30 minutes

to 8 hours) appears on the TV

screen.

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will be

turned off automatically.

• To change the recording length during One-touch

Timer Recording, press [RECI] repeatedly until

desired length appears.

• To cancel One-touch Timer Recording within the

specified time, press [STOPC].

Hint

• The remaining recording time will appear on the TV

screen during One-touch Timer Recording. Press

[DISPLAY] to see it on the TV screen.

Note

• If VHS One-touch Timer Recording is completed

during HDD/DVD playback or recording, the VHS

will be in stop mode and the HDD/DVD keeps the

current mode.

• You cannot use the pause function during One-

touch Timer Recording.

• When One-touch Timer Recording is finished and

the power is turned off, the unit will switch to the

timer-standby mode automatically if a timer

recording has been programmed.

DVC to VHS Dubbing

This function helps you to dub the contents in the

DVC (digital video camcorder) to VHS.

Preparing for DV dubbing (DVC to VHS):

• Insert a recordable videotape.

• Make sure your DVC is in video mode.

1Press [VCR].

2Select “DV” channel using

[INPUT SELECT F] or

[PROG. G\H].

3Select the recording mode using

[REC MODE]. (See page 93.)

4Stop or pause the DVC where you

want to start dubbing.

5Play back the DVC.

6Press [REC].

The dubbing will start.

Note

• Dubbing will start from where the tape is stopped.

Index Search

1Press [VCR].

2Press [SEARCH] so that the index

search menu appears.

3Enter the number of recordings you

want to skip using

[the Number buttons] within 30

seconds.

4Press [FWD D] or [REV E] to start

index search.

If you want to go in the forward direction, press

[FWDD].

If you want to go in the reverse direction, press

[REVE].

After index search, the VHS will play back the

tape automatically.

Note

• This function is not available during recording.

• Every time a tape is recorded, an index mark is

written on the tape.

• You can make the index mark up to 20.

Record tab

VHS

0:30

8:00 7:30

1:00

Normal Recording

VHS

E3NG0FD_EN.book Page 94 Wednesday, January 30, 2008 10:37 AM