Toshiba RD-XV48DTKF Connecting to a TV with an Hdmi Compatible Port, Actual Output Modes by Media

E3NG0FD_EN.book Page 21 Wednesday, January 30, 2008 10:37 AM

Selecting Progressive Scan (576p/480p or Interlaced 576i/480i) Playback

•If your TV is compatible with progressive scanning (576p/480p), connect the TV to the COMPONENT VIDEO OUT jacks of this unit and set “Video Out” setting to “Component (Progressive)” in “Setup” menu (See page 90.). Next, set your TV to the progressive scan mode.

•If your TV is not compatible with progressive scan, set “Video Out” setting to “Component (Interlace)”.

•Use a commercially available adaptor if the Video input jacks of your TVs or monitors are the BNC type.

•Only component and HDMI connections are compatible with the Progressive Scan.

Connecting to a TV with an HDMI Compatible Port

[HDMI CONNECTION]

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows digital transfer of both digital video signals and multi-channel audio signals. This is the best method to connect this unit. It can minimise the deterioration of image quality.

Use the HDMI cable (commercially available) for connection.

Connect the HDMI output jack of this unit to the HDMI input jack of TV.

HDMI cable (not supplied)

Introduction Connections Basic

HDMI OUT

this unit

To HDMI input jack

HDMI IN

TV

Setup Recording

Selecting HDMI mode

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed. 576p (PAL) / 480p (NTSC) J 720p J 1080i

J1080p (An HDMI mode that is not supported by the display device will be skipped.)

Actual Output Modes by Media

Audio recording format		Dolby Digital /
		DTS / MPEG	Actual output
of the disc
		setting of this unit
	Dolby	PCM	2channel PCM
	Digital	Stream	Dolby Digital
	LPCM	PCM	2channel PCM
DVD-video		Stream
	DTS	ON	DTS
		OFF	-
	MPEG	PCM	2channel PCM
		Stream	MPEG
	Dolby	PCM	2channel PCM
	Digital	Stream	Dolby Digital
DivX®	MP3	PCM	2channel PCM
		Stream
	MP2	PCM	2channel PCM
		Stream	MPEG

For Audio CD, Video CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.

If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select “Stream” in “Dolby Digital” setting.

(See page 87.)

EN 21

PlaybackEditing Function Setup VHS Functions Others