Toshiba RD-XV48DTKF Setting a Disc to Protect, 58 EN, To cancel the disc protect, HDD a VCR

E3NG0FD_EN.book Page 58 Wednesday, January 30, 2008 10:37 AM

6 Repeat steps 4 to 5 until you register all the titles to be dubbed.

e.g.) HDD A VCR

HDD	VCR
	Dubbing List
Add	1.01/01/08 0:00 P10 SP
Delete All
Dubbing Start
	1/1

To delete a title:

1Go to the dubbing list, then select a title using [U \ D]. Then press [ENTER].

2Select “Delete” using [U \ D], then press [ENTER].

3Select “Yes” using [U \ D], then press [ENTER].

To move a title:

1Go to the dubbing list, then select a title using [U \ D]. Then press [ENTER].

2Select “Move” using [U \ D], then press [ENTER].

3Select a desired insert point using [U \ D], then press [ENTER].

To erase all the titles in the dubbing title list:

1Select “Delete All” in the dubbing menu using [U \ D], then press [ENTER].

2Select “Yes” using [U \ D], then press [ENTER]. Final confirmation message will appear.

3Select “Yes” using [U \ D], then press [ENTER].

•To go back and forth between dubbing menu and dubbing list, use [L \ P].

7 After adding all the titles you want, select “Dubbing Start” in the dubbing menu using [U \ D], then press [ENTER].

8 Select a desired recording mode using [L \ P], then press [ENTER].

e.g.) HDD A VCR

HDD VCR

Please select REC MODE.

SP LP

Confirmation message will appear.

58 EN

•Depending on the dubbing direction, the available recording mode varies.

9 Select “Yes” using [U \ D], then press [ENTER].

Start Dubbing?

Yes

No

If dubbing continues when timer recording starts, the next display will appear.

Timer Recording is in standby.

Start Dubbing?

Yes

No

Dubbing will start.

• It may take awhile to prepare for the dubbing.

To stop the dubbing in progress:

Press [C STOP] on the front panel.

Press [STOP C] for 2 seconds on the remote control.

Note

•Dubbing will be cancelled 2 minutes before starting timer recording.

Setting a Disc to Protect

VR

DVD-RW DVD+RW DVD+R

To prevent accidental over-recording, editing or erasing of recordings, you can protect them using “Setup” menu.

Insert a recordable disc.

1 In stop mode, press [SETUP].

2 Select “DVD Menu” using [U \ D], then press [ENTER].

3 Select “Disc Protect OFF A ON” using [U \ D], then press [ENTER].

4 Select “Yes” using [U \ D], then press [ENTER].

The disc is protected.

5 Press [SETUP] to exit.

Note

•The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted.

•You can select only “Disc Protect ON A OFF” when a protected disc is inserted.

To cancel the disc protect:

•Select “Disc Protect ON A OFF” at step 3, then select “Yes”.

•If you insert a disc protected with this unit, “Disc Protect ON A OFF” will appear instead of “OFF A ON”.