Toshiba RD-XV48DTKF owner manual One-touch Timer Recording OTR, 44 EN

“Timer Programming” list will appear.

E3NG0FD_EN.book Page 44 Wednesday, January 30, 2008 10:37 AM

One-touch Timer Recording (OTR)

Video	VR
HDD DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space remaining for the time you set. (See page 94 for VHS recording.)

1 Follow steps 1 to 6 in “Basic Recording” on page 43.

2 Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen.

One-touch Timer Recording will start.

0:30

Normal

Recording 1:00

8:00 7:30

•When the unit reaches the specified time, it will be turned off automatically.

•To change the recording length during One- touch Timer Recording, press [REC I] repeatedly until the desired length appears.

•To cancel One-touch Timer Recording within the specified time, press [STOP C].

Hint

•The remaining recording time will appear on the TV screen during One-touch Timer Recording. Press [DISPLAY] to see it on the TV screen.

•The remaining recording time will be displayed on the front panel display during One-touch Timer Recording.

•Unlike the timer recording, you can perform the following operations during One-touch Timer Recording.

-Turn off the power. (One-touch timer recording will be cancelled.)

-Use [REC I] on the remote control.

Note

•You cannot use the pause function during One- touch Timer Recording.

•The unit will be turned off automatically under the following conditions.

-No space remains on the disc.

-If a power failure occurs.

•If the external equipment is connected to AV2, the picture of the external equipment will be output except during the DVD playback of this unit. Turn off the external equipment or press [DISPLAY] to output the picture of this unit.

Timer Recording

Video	VR
HDD DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R

You can set the unit to record up to 36 programmes, up to a month in advance. Daily or weekly programme recordings are also available.

•Be sure to set the clock before entering a timer programming.

Insert a recordable disc.

1 In stop mode, press [TIMER PROG.].

2 Select “New Programme” using [U \ D], then press [ENTER].

Timer Programming

0:00 THU 06/12

Date	Start	End	CH	STTL
				VPS/PDC
06/12	7:00	9:00	18
07/12	9:00	9:30	190

New Programme

1/1

•If there are 7 programmes or more, use [SKIP H \ G] to turn the page.

3 Enter the date using [U \ D], then press [P].

Each time you press [D] at the current date, the timer recording date will change as follows.

e.g., 1st January

01/01

Daily

M-F(Mon.-Fri.)

W-SAT

W-FRI

W-SUN

31/01

Timer Programming

0:00 THU 06/12

Skip		Date	Start	End
		01/01	- : -	- : -
	CH	REC To	Mode	VPS/PDC
901		HDD	XP	OFF
			XP	1:00
				1/1

4 Enter the time to start and to end using [U \ D], then press [P].

44 EN