Toshiba RD-XV48DTKF owner manual Press Enter when all information required is entered

E3NG0FD_EN.book Page 45 Wednesday, January 30, 2008 10:37 AM

5 Select the channel number to record using [U \ D], then press [P].

To record from the external input, select “AV1”, “AV2”, or “AV3”.

6 Select the recording media (“HDD” or “DVD”) using [U \ D], then press [P].

7 Select the recording mode using [U \ D], then press [P].

Refer to “Recording Mode” on page 37.

8 For DVB channel recording: Select “STTL” to “ON” or “OFF” using [U \ D].

If you set “STTL” to “ON”, subtitle will be recorded too.

•When analogue channel is selected, “VPS/PDC” will be displayed instead of “STTL”.

For analogue channel recording: Select “VPS/PDC” to “ON” or “OFF” using [U \ D].

Refer to “VPS (Video Programme System) / PDC (Programme Delivery Control)” on page 46.

•When DVB channel is selected, “STTL” will be displayed instead of “VPS/PDC”.

•VPS/PDC system is only available for HDD.

•VPS/PDC system is not available for “Daily” and “M-F”timer programme.

9 Press [ENTER] when all information required is entered.

Your programme setting is stored.

•To set another programme, repeat steps 2 to 9.

•To exit, press [TIMER PROG.].

•When 2 or more programmes are overlapped, “Timer programme overlapped” appears, and the overlapped programme will be displayed in blue. To correct the timer programme, refer to “Checking, Cancelling or Correcting the Timer Programming Information” on page 46.

Timer Programming

0:00 THU 06/12

Date	Start	End	CH	STTL
				VPS/PDC
06/12	7:00	9:00	18

07/12 9:00 9:30 190

07/12 17:00 18:00 901

New Programme

1/1

The icon will appear on the front panel display.

Note

•If you have not set the clock, the clock setting window will appear instead of the Timer Programming list. Continue from step 4 in “Manual Clock Setting” on page 36 before programming the timer.

•Press [U \ D] to move the cursor in “Timer Programming” list.

•If you have a timer programme with VPS/PDC function, and if you are watching different channel from the timer programme, confirmation message to change the channel will appear 15 minutes before the programme starts (the message will also re- appear 30 seconds before the programme starts). The channel will automatically be changed to the programmed channel 15 seconds before the programme starts.

Alternate recording (DVD only)...

If there is no recordable disc in the unit, if the disc does not have enough space to complete the recording, or if the material is “copy-once” programme and prohibited to be recorded on a DVD in the unit, the unit will detect it and automatically record to the HDD even when DVD is selected as the recording media. If the available space on the HDD is less than that of DVD, the unit will not perform the alternate recording. This feature is available only for timer recording. Not available for one-touch timer recording.

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others

EN 45