Toshiba RD-XV48DTKF owner manual Manual Tuning DVB, Country Setting, Select a Channel, 28 EN

Select “Country” using [U \ D], then press [ENTER].

E3NG0FD_EN.book Page 28 Wednesday, January 30, 2008 10:37 AM

Manual Tuning (DVB)

DVB

You can preset a DVB channel manually and individually.

1 Follow steps 1 to 3 in “Auto Tuning (DVB)” on page 27.

2 Select “Manual Tuning” using [U \ D], then press [ENTER].

3 Select your desired position number using [U \ D], then press [ENTER].

Manual Tuning (DVB)

ChannelAuto

•The tuner will begin to search up or down automatically. When a DVB channel is found, the unit will stop searching.

•When “Auto” is selected the unit will search for the channels which have not been stored in channels memory.

4 Press [SETUP] to activate the setting.

Country Setting

DVB

You can set the DVB channels to Channel Plan of each country.

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2 Select “Channel” using [U \ D], then press [ENTER].

3

4 Select your desired country using [U \ D], then press [ENTER].

General Setting
Playback
Display	Country
Video	Auto Tuning (DVB & ANALOG)
	Country
Recording	DVB Channel Setup
Clock	France	Channel Setup
	Spain
Channel
	Germany
DivX
	Italy
HDMI
	Switzerland
Reset All

5 Press [SETUP] to exit.

Select a Channel

You can select memorised channels by using

[PROG. G \ H].

You can select a channel using [PROG. G \ H] or directly enter the channel using

[the Number buttons].

Notes on using [the Number buttons]:

•For one or two-digit number channels, the channels will be identified 2 seconds after you press the channel number, or right after you press [ENTER]. For example, if you want to select channel 6, press [6] and wait for 2 seconds or press [ENTER]. You can only select channels 1 to 999.

•Analogue channels will be stored in channel 901- 999 and DVB channels will be stored in channel 1- 900 after it is scanned by this unit.

To switch DVB, analogue and external input (AV1/ AV2/AV3/DV(AV4)) mode.

You can switch between DVB, analogue and external input (AV1/AV2/AV3/DV(AV4)) mode by pressing [INPUT SELECT F] repeatedly. The mode changes as follows:

DVB mode „ Analogue mode „ AV1 „ AV2 „ AV3 „ DV(AV4)

•You can also switch the mode by using [PROG. G \ H].

•You can select any DVB channels using

[the Number buttons] when you are in analogue or external input (AV1/AV2/AV3/DV(AV4)) mode.

•You can select any analogue channels using

[the Number buttons] when you are in DVB mode.

28 EN