Toshiba RD-XV48DTKF owner manual Selecting the Sound Mode, Reformatting a Disc Manually

In stop mode, press [SETUP].

E3NG0FD_EN.book Page 41 Wednesday, January 30, 2008 10:37 AM

Reformatting a Disc Manually

Video	VR
DVD-RW	DVD-RW DVD+RW

If you are using a DVD-RW/+RW disc, you can format the disc by performing “Format”. You can format DVD- RW disc for either Video mode recording or VR mode recording. DVD+RW disc can be formatted in order to erase all content of the disc.

Note

•When you reformat the disc, the contents of the disc are erased.

•Make sure that the recording format is set to the desired mode. (Refer steps 1 to 6 in “Choosing the Recording Format of a Blank DVD-RW Disc” on page 39.)

Insert a recordable disc.

1

2 Select “DVD Menu” using [U \ D], then press [ENTER].

3 Select “Format” using [U \ D], then press [ENTER].

4 Select “Start” using [U \ D], then press [ENTER].

For DVD+RW, use [U \ D] to select “Yes”, then press [ENTER].

A pop up window will appear and prompt you to confirm.

5 Select “Yes” using [U \ D], then press [ENTER].

e.g.) VR mode DVD-RW

Are you sure?

Yes

No

Formatting will start.

If you want to cancel formatting, select “No”.

6 Formatting is complete.

Note

•It is not possible to use a disc formatted with this unit in other DVD recorder. When you use a disc with another DVD recorder, format a disc using that DVD recorder.

Selecting the Sound Mode

This unit can receive bilingual broadcasts.

You can switch between modes by pressing [AUDIO D]. Each mode is indicated on the TV. When you record a DVB channel, only output sound channel will be recorded.

Setting External Input Audio

Video	VR
HDD DVD-RW	DVD-RW DVD-R

DVD+RW DVD+R

When the external input audio is a bilingual broadcast, you can choose “Stereo” or “Bilingual” to record on an HDD/DVD. This setting is only for recording external input (AV1/AV2/AV3).

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

2 Select “Recording” using [U \ D], then press [ENTER].

3 Select “External Input Audio” using [U \ D], then press [ENTER].

General Setting

Playback
Display	Auto Chapter
Video	Recording Audio Select (XP)
Recording	Auto Finalise
Clock	Aspect Ratio (Video mode)
Channel	Make Recording Compatible
DivX	Bilingual Recording Audio
HDMI	External Input Audio
Reset All	Video Colour System

4 Select “Stereo” or “Bilingual” using [U \ D], then press [ENTER].

External Input Audio

Stereo

Bilingual

5 Press [SETUP] to exit.

Hint

•If you select “Stereo”:

The audio will be recorded as “stereo audio”.

•If you select “Bilingual”:

The audio will be recorded as “bilingual audio”. (See “Setting Bilingual Recording Audio” on page 42 for more detail.)

Introduction Connections Basic Setup Recording PlaybackEditing Function Setup VHS Functions Others

EN 41