Toshiba RD-XV48DTKF owner manual Channel Setting, Auto Tuning DVB & Analog

E3NG0FD_EN.book Page 25 Wednesday, January 30, 2008 10:37 AM

Channel Setting

You can retune this unit or edit the channel setting with following methods.

Auto Tuning (DVB & ANALOG)

Programme the tuner to scan both analogue and DVB channels you can receive in your area.

1 In stop mode, press [SETUP]. Select “General Setting” using [U \ D], then press [ENTER].

General Setting menu will appear.

2 Select “Channel” using [U \ D], then press [ENTER].

3 Select “Auto Tuning (DVB & ANALOG)” using [U \ D], then press [ENTER].

The unit will start storing channels available in your area.

General Setting
Playback	Country
Display
Video	Auto Tuning (DVB & ANALOG)
Recording	DVB Channel Setup
Clock	ANALOG Channel Setup
Channel
DivX
HDMI
Reset All

Wait for several minutes to finish channel storing.

•Analogue channels will be stored in channel 901-999 after it is scanned by this unit.

4 Press [SETUP] to exit.

You can select only the channels memorised in this unit by using [PROG. G \ H].

To cancel auto tuning

Press [RETURN] or [SETUP] during scanning.

Note

•The selection will be affected by how you receive TV channels in your local area.

•If the auto tuning is cancelled during scanning, some channels not yet tuned may not be received.

•You cannot change the channel when this unit is in any recording mode (normal recording, One-touch Timer Recording or timer recording).

Auto Tuning (ANALOG)				Introduction
ANALOG
Programme the tuner to scan only the analogue
channels you can receive in your area.
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],				Connections
then press [ENTER].
2 Select “Channel” using [U \ D],
then press [ENTER].
3 Select “ANALOG Channel Setup”
using [U \ D], then press [ENTER].				Basic
4 Select “Auto Tuning” using [U \ D],
then press [ENTER].				Setup
The unit will start storing channels available in
your area.
	ANALOG Channel Setup
	Auto Tuning			Recording
• Analogue	channels will be stored		in channel
	Manual Tuning
	Move
Wait for several minutes to finish channel storing.
901-999 after it is scanned by this unit.
5 Press [SETUP] to exit.
You can select only the channels memorised in				Playback
this unit by using [PROG. G \ H].
To cancel auto tuning
Press [RETURN] or [SETUP] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.				Editing
• You cannot change the channel when this unit is in
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
any recording mode (normal recording, One-touch
Timer Recording or timer recording).
• Sorting of TV channels from 901 to 906 will be
performed automatically as follows.				FunctionSetup
901: TF1	902: F2	903: F3
904: CANAL+ 905: F5/ARTE		906: M6
				VHS Functions
				Others

EN 25