Muratec MFX-1600, MFX-1200 manual Combine, Ultra copy mode

Make sure the machine is in the Copy mode.

Combine

Note: This feature is available only for MFX-1600 model.

This feature allows you to copying from four one-sided originals to one sheet of paper.

1

2 Place your original document in ADF face up, or on the FBS glass face down. 3 Enter the document size by pressing the DOCUMENT SIZE.

4 Press ADVANCED FUNCTIONS twice, ENTER. The LCD shows the current setting:

Combine :Off

←/→ /Enter

Note: This feature is Off for default setting. However, you can turn on it for the default. (See page 4.7.)

5 Press or until the setting you want appears. In this example, we ve chosen On.

		Combine		:On
		←	/→	/Enter
6
	Press ENTER to save the setting. The machine return to the standby mode
	with following display:
		Copy <Combine>			1
		Ltr	[ Ltr ] 100%
7
	As needed, set the following:
		Select document type and adjust image contrast
		Enter the number of copies
		Set copy reduction or enlargement ratio
8	Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

Basic operation

Ultra copy mode

Note: This feature is available only for MFX-1600 model.

Note: The enlargement/Reduction copy is not available with this mode.

Note: This mode needs more memory than normal mode. So when you try to make many copies at a time, the memory overflow may occur.

This feature allows you to copying with more high quality resolution.

1	Make sure the machine is in the Copy mode.
2	Place your original document in ADF face up, or on the FBS glass face down.
3	Enter the document size by pressing DOCUMENT SIZE.
4	Press ADVANCED FUNCTIONS three times, ENTER. The LCD shows the current
	setting:
		Ultra Copy		:Off
		←	/→	/Enter
5	Press or			until the setting you want appears.
	In this example, we ve chosen On.
		Ultra Copy		:On
		←	/→	/Enter
6	Press ENTER to save the setting. The machine return to the standby mode
	with following display:
		Copy <Ultra Copy> 1
		Ltr	[ Ltr ] 100%
7
	As needed, set the following:
		Select document type and adjust image contrast

Enter the number of copies

8 Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

2.17