Muratec MFX-1200, MFX-1600 manual Programming a broadcast / group, Report

If you want to select a different programmable one-touch key than what appears on the LCD, press that key now.

Advanced features

17 Press ENTER. The LCD asks you for the type of confirmation report you want to set for this programmable one-touch number.

		Report		/→	:---
			←		/Enter
18
	Press		until the mode you want appears.
19	Press ENTER. The LCD asks if you want to send a cover page for this program-
	mable one-touch number.
		Cover Page			:---
			←	/→	/Enter
20	Press		until the mode you want appears.
21	Press ENTER. The LCD asks if you want to turn the Fax & Copy feature on or
	off for this programmable one-touch number.
		Fax & Copy			:---
			←	/→	/Enter
	Note: When the memory transmission is set to off in step 15, this LCD will
			not appear and go to step 24.
22	Press		until the mode you want appears.
23	Press ENTER.
24	Press STOP to return your machine to standby mode.

Programming a broadcast / group

Programming a broadcast is very similar to programming a delayed transmission. But instead of sending to just one phone number, you set up multiple numbers for the transmission.

To program a broadcast / group into a programmable one-touch key:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If you re changing a previously stored command: If your previous com- mand for this key was a for a broadcast/group transmission, and you want to keep this key programmed for a broadcast/group transmis- sion, use these instructions to make changes. But if you want to assign this key to a completely different operation for batch transmis- sion, then you must first erase the stored command before programming the new one.

3

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication

←/→ /Enter

Note: If changing a previously stored command, skip to step 7.

3.38