Muratec MFX-1200 SecurityRx is Off, Select Paper Size, Sub-address In Use, Too Many Characters

Just in case
What you see on the LCD	What it means/What to do
Please Supply Paper	The paper cassette or bypass tray is out of
	paper. Supply paper to the cassette and/or the
	bypass tray.
Please Wait	Your fax machine s printer is either warming up
	or busy. Please wait until the fax is finished
	printing and then re-try your command or opera-
	tion.
Polling In Use	You tried to store the polling document in your
	fax machine, where one already had been
	stored. Wait for the fax to complete the regular
	polling operation or delete the stored document,
	then try again.
Printer In Use	The command you re trying to enter requires the
	use of the printer, which is already in use. Wait
	for the fax to finish printing, then try again.
Protect Doc. Stored	A received document was in your fax s memory
	when you tried to turn off the security reception
	passcode. Print the received document from your
	fax s memory, then retry the desired operation.
Ration must be 100%	You cannot set the magnification ratio in
	Negative/Positive copy or Ultra copy mode.
	Set the magnification ratio to 100 % to use the
	Negative/Positive copy or Ultra copy mode.
REPLACE DRUM SOON	Your machine can print about 500 more sheets,
500 PRINTS REMAIN	but your drum will need to be replaced soon.
	Please contact your authorized Muratec dealer to
	purchase a new drum cartridge if you don t
	already have one.
REPLACE DRUM UNIT	Your drum cartridge doesn t work.
PRINTER NOT USABLE	Your machine cannot print until it is replaced
	with a new drum cartridge.
	Replace it.
Scanner In Use	The command you re trying to enter requires the
	use of the scanner, which is already in use. Wait
	for the fax to complete the scan, then re-try the
	desired command.

What you see on the LCD	What it means/What to do
SecurityRx is Off	You tried to turn the security reception ON using
	a Soft key which is assigned to set the security
	reception to ON or OFF, but security reception
	setting has not set to on.
	To turn on or off the security reception using a
	Soft key, first set the security reception setting to
	on. (See pages 3.50 3.51.)
Select Paper Size	You tried to make a copy in the following condi-
	tions:
	Paper size selection is set to Auto .
	The bypass tray has the paper other than
	Letter, Legal, Half-letter.
	Paper cassette(s) runs out of paper.
	Press PAPER SIZE to select your desired paper.
Sub-address In Use	You tried to enter a sub-address identical to one
	already being used in another F-Code box. Enter
	a different sub-address.
TONER ALMOST EMPTY	Your machine is almost out of toner. About 50
50 PRINTS REMAIN	more sheets can be printed, but please contact
	your authorized Muratec dealer soon to purchase
	a new toner cartridge if you don t already have
	one.
TONER EMPTY	Your toner cartridge is empty.
PRINTER NOT USABLE	Replace the toner cartridge. Your machine cannot
	print until it is replaced with a new toner car-
	tridge.
Too Many Characters	You attempted to enter too many numbers or
	other characters in the current operation.
	Press CANCEL to delete the extra characters, then
	try again. You may wish to review the operation s
	appropriate instructions.
Too Many Locations	You tried to enter too many numbers for a
	broadcast. You can enter up to 200 autodialer
	number and up to 30 numbers entered through
	the numeric keypad.
	Press CANCEL to delete the extra numbers and
	then try again.

5.8