Settings for dialing

Changing the dialing pause length

Default setting: 2 seconds.

The pause is set by the factory to last two seconds, but you can set it to last as long as ten seconds if necessary. To change the pause length:

1 Press Program key, B, 2, 0, 5, ENTER.

Dialing Pause

Time (02-10):02

2 Use the numeric keypad to enter the length you want for the dialing pause. Here, we ve chosen nine seconds.

Dialing Pause

Time (02-10):09

Note: The length setting requires two digits. Always enter a leading zero for lengths less than 10 seconds.

3 Press ENTER to save the setting.

Changing the default settings

Changing redial settings

Default setting: Number of redial: 2 times, Redial interval: 1 minute.

It s up to you how many times the fax redials a number and how long it waits between redials (that length of time between calls is the redial interval).

To program the redial settings:

1 Press Program key, B, 2, 0, 4, ENTER.

#Of Redials

#(02-15):02

2 Use the numeric keypad to enter the number of redials you want. Choose from 2 to 15 redials. In this example, we ve entered 03.

#Of Redials

#(02-15):03

Note: Enter a leading zero when entering a quantity less than 10.

3 Press ENTER to save the setting.

4 The LCD now shows:

Redial Interval

Interval (1-5):1

5 Use the numeric keypad to enter the length you want between redial attempts. Choose from 1 to 5 minutes. In this example, we ve chosen 4.

Redial Interval

Interval (1-5):4

6 Press ENTER to save the setting.

4.5

Page 103
Image 103
Muratec MFX-1600, MFX-1200 manual Settings for dialing, Changing the dialing pause length, Changing redial settings