Type Communication ← /→ /Enter, 5558743 | Muratec MFX-1600 specification

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication

Note: If changing a previously stored command, skip to step 7.

5 Press until Communication appears.

Type :Communication
← /→ /Enter
6 Press ENTER. The LCD now shows either:
P2:Fax#/Advan.Func.	or	P2:Fax#/Advan.Func.
_		9-5558743_

7	Use the numeric keypad to enter the number exactly as your machine should
	dial it, including whatever codes your phone system requires. The number can
	be up to 40 characters in length:

		P2:Fax#/Advan.Func.
		9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or to scroll to the right.

8 Now, while you can still see the fax number on the LCD, press

ADVANCED FUNCTIONS, ENTER. The LCD shows:

9 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, Do this at 5:05 PM on the 30th. )

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

							Advanced features
	Option 2:				Perform the command at a certain time each day you press the
					key. (For example, Do this at 5:05 PM today. )
					To select this option, use the numeric keypad to enter 0, 0 and
					then the time the fax should perform the command:

						Delayed
						Enter Time: 00/17:05
10
10	Press ENTER, ENTER. The LCD asks if you want to make additional settings for
	this programmable one-touch number.

		Option		/→		:Off
			←	/→		/Enter
	If you do not want to make additional settings, press ENTER. Then skip to step
	24.
	If you do want to make additional settings, press and ENTER.
11	The LCD asks which resolution you want to use for this programmable one-
	touch number.
		Resolution			:------
			←	/→		/Enter
12	Press		until the mode you want appears.
	Note:		For any of the following settings, choose ----- if you do not want to
			specify the displayed setting for this programmable one-touch key.
13	Press ENTER. The LCD asks you to select a contrast mode for each programma-
	ble one-touch number.
		Contrast		/→	:-------
			←	/→		/Enter
14	Press		until the mode you want appears.
15	Press ENTER. The LCD asks if you want the memory transmission on or off
	when using this programmable one-touch number.
		Memory Tx			:---
			←	/→		/Enter
16	Press		until the mode you want appears.

3.37