Muratec MFX-1600, MFX-1200 manual Programming an F-Code transmission, P2Fax#/Advan.Func

6 Press ENTER. The LCD now shows either:

P2:Fax#/Advan.Func.	or	P2:Fax#/Advan.Func.
_		9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

P2:Fax#/Advan.Func. 9-5550696_

Your display shows only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or to scroll to the right.

Important: Do not press ENTER.

8 Next, while you can still see the fax number on the LCD, press ADVANCED FUNC- TIONS twice and then press ENTER.

9 If you want the polling to begin immediately every time you press the key, press ENTER and skip to step 12.

If you want to delay the polling, press ADVANCED FUNCTIONS, ENTER.

10 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, Do this at 5:05 PM on the 30th. )

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, Do this at 5:05 PM today. )

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

11 Press ENTER, ENTER.

12 Press STOP to return your machine to standby mode.

Advanced features

Programming an F-Code transmission

For this operation to work, two things must be true:

You must know how the remote fax is using each F-Code box to which you re transmitting for example, as a security box or a relay box. Different fax manu- facturers may use slightly different terms, but the concepts are the same.

You must know the remote fax s ITU-Tsub-address and password for each box to which you want to transmit.

To program an F-Code transmission into a programmable one-touch key:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for an F-Code transmis- sion and you want to keep this key programmed for an F-Code transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored com- mand before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication ← /→ /Enter

3.41