Muratec MFX-1600 Automatically fax redialing, Redialing manually, View Redial History

Redialing

Automatically fax redialing

If your fax call fails, your machine automatically redials it. In this Auto Redial mode, your fax automatically redials the number up to two times at one minute inter- vals.

Note: You can change the redial time and interval settings. (See Changing redial settings, page 4.5.)

While in the Auto Redial mode, the machine can continue to receive faxes and can make as many as 99 fax transmissions.

Note: If you used either the MONITOR/CALL key or a handset to dial the call, you must redial manually (see below).

Note: If the last redial attempt fails, your machine may print (and/or display) error messages.

Redialing manually

You can always redial calls manually. And you must redial manually if you used either the MONITOR/CALL key or an optional handset to dial the failed call.

To redial a fax call manually without using the MONITOR/CALL key or an optional handset:

1 Set the document and set the resolution and contrast.

2 Press REDIAL/PAUSE. The LCD will show:

View Redial History 0:1234567890

3 Your machine can remember the last 10 dial numbers. Press or until the dial number you want to redial appears.

4 Press START.

To redial a fax call manually with the MONITOR/CALL key or an optional handset:

1 Make sure the document is in the ADF and that the resolution and contrast are set.

2 Press MONITOR/CALL or lift the optional handset to get a dial tone.

Basic operation

3 Press REDIAL/PAUSE. The LCD will show:

View Redial History 0:1234567890

4 Your machine can remember the last 10 dial numbers. Press or until the dial number you want to redial appears.

5 When you hear fax tones from the remote unit, press START.

Note: If a person answers the phone, use the optional handset to tell that person you re sending a fax. When you hear fax tones, press START.

To redial a voice call manually using the optional handset:

1 Lift the optional handset to get a dial tone.

2 Press REDIAL/PAUSE. The LCD will show:

View Redial History 0:1234567890

3 Your machine can memory the latest 10 dial numbers. Press or until the dial number you want to redial appears.

4 Press START.

When the other person answers, use the optional handset to speak to that person.

2.7