UsingYourRange
Usingthe surfaceburners
Control knobs must be pushed In, then turned to the LITE position. The clicking sound is the ignition sparking.
To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and OFF.
Surface burner marker
Surface burner markers
The solid dot in the surface burner marker shows which surface burner is turned on by that knob.
‘Until you get used to the settlngs, use the followlng as a gulde. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.
Use UlE to light the burner. After the burner lights, turn control back to a desired setting to stop the clicking of the ignition.
Use HI to start foods cooking; to bring liquids to a boil.
Use a medlum settlng to continue cooking or to fry chicken or pancakes; for gravy, pudding and icing; to cook large amounts of vegetables.
Use a low setting to keep food warm until ready to serve.
NOTE: Do not cook with the control in the LITE position.
In case of a prolonged power fallure:
Surface burners can be manually lighted. Hold a lighted match near a burner and turn the control to the LITE position. After the burner lights, turn the control to the desired setting.
Burn, Flre and Exploslon Hazard
l Burner flame should not extend beyond the edge of the cooklng utensll. The flame can burn you and cause poor cooking results.
l
l
l
Be sure all control knobs are’turned to OFF when you are not cooking. Someone could be burned or a fire could start If a burner Is accldentally left ON.
If the flame should go out while cooklng, or If there Is a strong gas odor, turn the burners OFF. Wait five minutes for the gas odor to dlsappear, before rellghtlng burner. If gas odor Is still present, see safety note on page 3. Fallure to follow these precautions could result in exploslon or fire.
Do not attempt to light the oven burner during a power failure. Personal injury could result.
6
