Usingandreplacingthe light bulbs
The woktop light
The fluorescent light is on the bottom of the contro! panel. The Cimktop Lght Switch is located on the left side of the front control panel.
ElectrIcal Shock and Burn Hazard
Make iwre power to the range has been dlswnnected at the maln power supply and that all surface burners are OFF and cool. Fallure to do so could result In elect&al shock or burns.
To replace the woktop light:
1.Turn off the control knobs and unplug appliance or disconnect at the main power supply.
2.Lii up the cooktop and disconnect the electrical plug to the backguard. Lower the cooktop.
3.Grasp each side of the backguard and lift it straight up.
4.Turn backguard over. Remove the four screws holding the back cover panel, then remove the cover.
5.Roll bottom of fluorescent tube away from you until both ends can be removed from the receptacles. Replace with a
6.Replace the back cover panel and screws.
7.Replace the backguard. Reconnect the electrical plug under the cooktop.
8.Plug in appliance or reconnect at the main power supply.
19
