Muratec MFX-1600, MFX-1200 manual Enter PIN Number 1057, 1Fax Number

Important: While in PIN Mode 1, any autodialer numbers you use must include the PIN. This also applies to autodialer numbers used with batch transmission (see page 3.12) or programmable one-touch keys (see pages 3.36 3.49).

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission, you must store the PIN access code for the remote unit within the appropri- ate batch box.

If you chose Mode 2 as you autodial, load the code

In this mode, you don t have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1	Dial the number as you normally would, using the autodialer. Here, we ve
	pushed one-touch key A. The machine now asks for the PIN:
		Enter PIN Number
		_
2
	Use the numeric keypad to enter the PIN.
		Enter PIN Number
		1057_

3 Press START. Your machine dials the number.

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see page 3.12), you must store the PIN access code for the remote unit within the appropriate batch box.

Dialing from the numeric keypad while using the PIN mask

If you ve specified Mode 1 use star power

1 Enter the phone number, then press the * ( star ) key and enter the PIN. The PIN always goes last. For example, to dial 19725550911 with a PIN of

123456 , enter 19725550911*123456:

Press Start 19725550911*123456_

2 Press START. The PIN disappears from the display, and your machine dials the desired phone number.

Advanced features

If you ve specified Mode 2 the machine guides you

1 Enter the phone number as usual.

Press Start 19725550911_

2 Press START. The LCD shows:

Enter PIN Number

_

3 Use the numeric keypad to enter the PIN.

Enter PIN Number 123456_

4 Press START. Your machine dials the number.

Performing batch transmission while using the PIN mask

Note: The following instructions presume you are familiar with how to set and use both your machine s autodialer and its batch transmission feature. If you need to review, see pages 3.1 3.9 for more on the autodialer and/or page 3.12 for more on batch transmission.

If you ve specified Mode 1 or Mode 2

Important: Any autodialer number you use with batch transmission must include the PIN. (To review how to include this information in an autodialer number, review the Mode 1 instructions under Autodialing while using the PIN mask, page 3.52.)

Before sending a batch transmission the first time, you must store the PIN within its batch box. Here s how:

1 Follow the steps for creating or modifying a batch box (pages 3.12 3.13). The LCD asks for the fax number (here, we re working with batch box 1):

1:Fax Number

_

2 Enter an autodialer number, or use the numeric keypad to enter the fax num- ber, to which the batch transmission should go.

Important: If you re entering a number from the numeric keypad, enter the fax number, followed by the * ( star ) key and then the PIN.

3.53