Muratec MFX-1200, MFX-1600 manual Macro keys, Programming the Macro key

Document storage:

Regular polling documents (page 3.15)

Advanced features

Macro keys

If you perform the same operation repeatedly, you can automate the operation using	F-Code polling documents (pages 3.30 3.31)
a macro. A macro is a series of the several steps that you group together as a single
command to accomplish the operation automatically.	Communications functions:
A macro key faithfully records up to 60 steps that you performed to teach the macro.
	Delayed transmission (explained on pages 3.11)
You can teach the Macro keys to carry out any of the following jobs, but you cannot
	Broadcasting (page 3.10)
teach the operation regarding the machine settings.
	Regular polling (pages 3.15 3.16)
Note: One Macro key can hold only one job. It cannot combine two or more jobs.
	Batch transmission (pages 3.12 3.14)
Copy:	F-Code transmission (page 3.34)
All copy settings	F-Code polling (page 3.35)

Printouts:	Programming the Macro key
Machine settings list (page 4.10)	1 Press MACRO PROGRAM, ENTER. The LCD shows:
Fax settings list (page 4.10)
Copy settings list (page 4.10)			Select Macro Key
Activity journal (page 3.22)			M1:No Number Stored
Delayed commands list (page 2.9)	2	Press the Macro key (M1 or M2) you want to program or change. In this exam-
Delayed commands documents (page 2.9)
		ple, we ve chosen M2.
One-touch list (page 3.3)
			Select Macro Key
Speed-dial list (page 3.6)
			M2:No Number Stored
Programmable one-touch numbers list (page 3.49)
		Press ENTER. If you chose the key already programmed, proceed to step 4.
Call group directory (page 3.8)
	3 Otherwise, skip to step 5.
Blocked numbers list (page 3.55)
	4 The LCD shows:
Sample cover page (page 3.24)
Department time list (page 3.57)			Overwrite?
List of F-Code boxes (page 3.30)			Check	Enter/Cancel
List of documents stored in F-Code boxes (page 3.30)		If you want to overwrite the operation already programmed, press ENTER.
Batch transmission documents (page 3.13)
		If you want to overwrite only the job s name, press CANCEL and go to step 9.
Batch box list (page 3.13)	5	If you do not want to overwrite the key you have choice, press STOP.
List of stored batch documents (page 3.13)		The LCD of stand-by mode appears, which means the machine is ready to reg-
F-Code Box (bulletin box) documents (page 3.31)		ister the steps into the Macro key.
Macros list (page 3.20)			Fax Ready
Stored polling documents (page 3.15)			Jun	1 2000 13:30
Security receive documents (page 3.51)		Note: It keeps beeping during the job registration in order to make notice of
			the registration mode.

3.18