Muratec MFX-1600 Select F-Code Box 01No Number Stored 01NY Branch Office, 03Sub-Address No 123456

Relay box Receives documents, then relays them to other machines. The machine that relays the document is called a hub . Your fax machine can either send to a hub or it can be a hub.

4 elements of an F-Code box

Each F-Code box has the following four elements:

(1)F-Code box number (01-50)

(2)F-Code box name (up to 16 characters)

(3)F-Code sub-address (up to 20 characters - can include numbers and the * and # characters only)

(4)I.D. Code (4 digits)

You will choose the information for each of these elements, and enter it into your machine. The following steps will walk you through entering and changing that information.

To create or modify an F-Code box:

1	Keep pen and paper with you as you follow these steps. As you decide on a
	sub-address and enter it into your machine, write it down. Remember to:
	(1) write down which box goes with which sub-address, (2) write down any
	passwords or I.D. codes you enter, (3) keep these printed records in a safe
	place.
2	Press Program key, C, 4, 0, 1, ENTER. Depending on whether you already
	have a name entered for F-Code box 01, the LCD shows:
		Select F-Code Box	or	Select F-Code Box
		01:No Number Stored		01:NY Branch Office

3 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code box you want to create or modify. Here, we ve entered 0, 3 and see either:

		Select F-Code Box	or	Select F-Code Box
		03:No Number Stored		03:Muratec America
4	If want to select a different F-Code box than the one that appears on the LCD,
	use the numeric keypad to enter the two-digit F-Code box number now.
5	Press ENTER. What you do next depends on whether you re creating or
	modifying the F-Code box:

If creating skip to step 7.

If modifying the LCD asks you to enter the proper I.D. code. The LCD shows:

03:Set F-Code Box Enter I.D. Code:****

Advanced features

6 Use the numeric keypad to enter the 4-digit I.D. code (not the ITU-Tsub- address and not the ITU-Tpassword) and then press ENTER.

Note: If you enter an invalid I.D. code, the fax machine rejects the attempt and aborts this operation.

7 The machine is now asking you to name this F-Code box. The LCD shows:

03:Box Name;Upper	or	03:Box Name;Upper
_		Muratec America_

If you do not want to enter or change this F-Code box s name, skip to step 9. If you do want to enter or change this F-Code box s name, go on to step 8.

8 Enter the name by using the one-touch keys. (If necessary, review Entering characters , page 1.12) An F-Code box s name can be up to 16 characters in length.

9 Press ENTER to save the box s name and continue. The LCD shows:

03:Sub-Address No.	or	03:Sub-Address No.
_		123456_

The fax machine now asks for this F-Code box s sub-address. This is the numerical identifier you must enter in order to communicate with any remote F-Code compatible fax.

If you do not want to change an existing sub-address, skip to step 11.

10 Use the numeric keypad to enter the sub-address to identify this F-Code box. The sub-address can be up to 20 characters in length and include any combination of numbers and the * and # characters (but no other non- numeric characters).

03:Sub-Address No. 654321_

Note: No other F-Code box in this machine can have the same sub-address as the one you enter here.

11 Press ENTER to save the sub-address.

Note: If you entered a sub-address already being used by another F-Code box, the machine beeps and briefly displays:

03:Sub-Address No. Sub-Address In Use

The machine now returns you to step 10. Please enter a different number for your F-Code box s sub-address.

3.27