Muratec MFX-1600, MFX-1200 manual Code polling

13 Press START.

If in step 10 you chose an immediate transmission, your fax machine begins dialing. If you chose a delayed command, the machine shows Reserved on the LCD, indicat- ing that it has stored the command in memory and will complete it later.

F-Code polling

1	Press FAX to switch the machine to Fax mode.
2	Press ADVANCED FUNCTIONS four times and then press ENTER.
		Enter Sub-Address
		_
3
	Use the numeric keypad to enter the appropriate sub-address.
	In this example, we ve entered 123456.
		Enter Sub-Address
		123456_
	Note: If you make a mistake, press CANCEL to erase the character, then
		enter the correct number.
4	Press ENTER. The LCD shows:
		Enter Password
		_
	Note: If this sub-address does not have a password, skip to step 6.
5	Use the numeric keypad to enter the password. In this example, we ve
	entered 654321.
		Enter Password
		654321_
6
	Press ENTER. The LCD shows:
		Enter Fax Number
		_
7
	Enter the fax number either by pressing a one-touch key, entering a speed-
	dial number or dialing from the numeric keypad. Do not press START.
8	What you do now depends upon when you want the polling to begin.
		To have it begin now, skip to step 11.

To delay it, go on to step 9.

Advanced features

9 Press ADVANCED FUNCTIONS, ENTER. The LCD shows:

Delayed

Enter Time: 15/17:05

10 Use the numeric keypad to enter the day and time when the polling should begin, then press ENTER.

11 Press START.

If in step 8 you chose an immediate polling, your fax machine begins dialing. If you chose a delayed command, the machine shows Reserved on the LCD, indicating that it has stored the command in memory and will complete it later.

3.35