Muratec MFX-1600, MFX-1200 manual Check Message printouts, What error messages can mean

Just in case

Check Message printouts

When there s a problem with a fax call and your machine detects an error, it pro- duces an error printout headed by the words Check Message. This printout lists the following information about the transmission:

The resulting error code

A communications error message (see What error messages can mean, below)

The phone number (or TTI, if programmed) of the fax machine with which your machine had attempted to communicate.

What error messages can mean

The error messages on Check Message printouts can mean a variety of things.

Here s a brief summary:

Error message	Possible meanings
Check condition of remote fax.	Remote machine malfunctioned
	No handshake signals from remote fax
	Wrong phone number reached
Repeat transmission.	Poor phone line conditions
	No handshake signals from remote fax
	Document misfeed or miscount
	Unable to reach remote machine after
	attempting specified number of redial tries
Line is busy.	Remote machine s line was busy
	Remote machine s line didn t answer
Check received documents.	Remote confirmation signal not received
	from remote fax
	Poor line conditions caused a poor image
Memory full.	Remote fax s memory is full
Dialing number is not set.	Stored phone number failed to dial properly
Stopped.	Someone pressed STOP at the remote fax
	in the middle of the handshake

5.11