Muratec MFX-1200, MFX-1600 manual Special copy function, Adjust image contrast, Sort copy setting

Basic operation

Adjust image contrast

Setting the contrast allows you to compensate for any excessive light or darkness, of the document pages you are copying.

Special copy function

Negative/Positive (reversing black and white areas)

To change the contrast setting, press CONTRAST repeatedly.

A glowing LED indicates the machine is using the setting named by that LED.

Note: To avoid confusing the Light and Dark settings, just remember Light lightens and Dark darkens t o keep it straight.

DARK

NORMAL

LIGHT

CONTRAST

If using this feature, the black and white areas of the original are reversed.

Note: You cannot combine this feature with Reduced or Enlarged copies.

Helpful tip: If you programmed a Soft key to turn on or off this feature, simply pressing that key will turn on or off this feature.

1	Make sure the machine is in the Copy mode.
2	Place your original document in ADF face up, or on the FBS glass face down.
3	Enter the document size by pressing the DOCUMENT SIZE.

Sort copy setting

Default setting: On

Helpful tip: If you frequently turn this feature off and on, you can set a Soft key (see page 3.17) to turn on or off by simply pressing that key.

1	Press Program key, B, 3, 0, 6.
2	Press ENTER.
	The LCD shows the current setting:
		Sort Copy	:On

←/→ /Enter

3 Press or until the setting you want appears. In this example, we ve chosen Off.

Sort Copy :Off

←/→ /Enter

4 Press ENTER to save the setting.

4	Press ADVANCED FUNCTIONS, ENTER. The LCD shows the current setting:
		Nega/Posi			:Off
		←	/→	/Enter
	Note: This feature is Off for default setting. However, you can turn on it for
		the default. (See page 4.7.)
5	Press or			until the setting you want appears.
	In this example, we ve chosen On.
		Nega/Posi			:On
		←	/→	/Enter
6	Press ENTER to save the setting. The machine returns to the standby mode
	with following display:
		Copy <Nega/Posi> 1
		Ltr	[ Ltr ] 100%
7
	As needed, set the following:
		Select document type and adjust image contrast
		Enter the number of copies
8	Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

2.16