Muratec MFX-1200, MFX-1600 manual Setting Block Junk Fax, Block Junk FaxOff ← /→ /Enter

Advanced features

3 Press ENTER to save the setting.

Note: If you press ENTER without entering the PIN, the fax machine beeps, indicates No PIN Number on the LCD and then returns you to step 2.

4 Continue with the steps for creating or modifying a batch box (pages 3.12 3.13).

Now you can perform batch transmission to this box while the PIN mask is activated.

Setting Block Junk Fax

Your fax machine s Block Junk Fax feature lets you bar the gates against unautho- rized incoming faxes ( junk fax ). But before you block junk fax, first understand how this feature works, to determine if it s right for you. There are four possible set- tings for Block Junk Fax:

Off The feature isn t activated.

Mode1 Your fax machine checks whether the last four digits of any phone number in your autodialer matches the last four digits of the remote fax s sub- scriber ID (the phone number part of the TTI). If it doesn t find a match, your machine disconnects the call.

Mode2 This mode rejects any call from a number whose last eight digits match any number in the blocked numbers list (explained later). Your machine can hold up to 50 blocked numbers.

Mode3 This rejects numbers that are not in the autodialer and also rejects num- bers that are in the blocked numbers list. This lets you keep a number on your autodialer for transmission to it, while still blocking its incoming calls by putting it in the blocked numbers list.

But before you activate the Block Junk Fax feature, please consider:

Not all fax machine owners enter their phone numbers in their Subscriber IDs. With Block Junk Fax activated, your machine would reject faxes from these machines.

Access codes can cause confusion. If an autodialer entry ends with extra codes, such as long-distance codes, Block Junk Fax will block out calls from those faxes.

To set Block Junk Fax:

1	Press Program key, B, 2, 1, 0, ENTER. The LCD shows your fax s current set-
	ting:

Block Junk Fax:Off

←/→ /Enter

2 Press or until the mode you want appears. Here, we ve chosen Mode2.

Block Junk Fax:Mode2

←/→ /Enter

3 Press ENTER to save the setting.

What you do next depends on what you selected in step 1:

If you selected Off or Mode1, press STOP to return to standby mode. If you selected either Mode2 or Mode3, go on to step 4.

3.54