Muratec MFX-1600, MFX-1200 manual Programming F-Code polling, Enter

18 Press ENTER. The LCD asks you to select a contrast mode for each programma- ble one-touch number.

		Contrast		/→	:-------
			←		/Enter
19
	Press		until the mode you want appears.
20	Press ENTER. The LCD asks if you want the memory transmission on or off
	when using this programmable one-touch number.
		Memory Tx			:---
			←	/→	/Enter
21	Press		until the mode you want appears.
22	Press ENTER. The LCD asks you for the type of confirmation report you want to
	set for this programmable one-touch number.
		Report		/→	:---
			←		/Enter
23	Press		until the mode you want appears.
24	Press ENTER. The LCD asks if you want to send a cover page for this program-
	mable one-touch number.
		Cover Page			:---
			←	/→	/Enter
25	Press		until the mode you want appears.
26	Press ENTER. The LCD asks if you want to turn the Fax & Copy feature on or
	off for this programmable one-touch number.
		Fax & Copy			:---
			←	/→	/Enter
	Note: When the memory transmission is set to off in step 20, this LCD will
			not appear and go to step 29.
27	Press		until the mode you want appears.
28	Press ENTER.
29	Press STOP to return your machine to standby mode.

Advanced features

Programming F-Code polling

For this operation to work, two things must be true:

The document which you re polling must exist in the remote fax s F-Code box (ITU-Tstandard sub-addressing/password box).

You must know the remote fax s ITU-Tsub-address and password (if any) for each box you want to poll.

To program an F-Code polling operating into a programmable one-touch key:

1 Press Program key, A, 3, 0, 1, ENTER. The LCD shows the first empty pro- grammable one-touch number available:

Select Program No.

P2:No Number Stored

Note: If P2 appears on the LCD, it means that you have already entered a number for P1. You can see what you programmed into P1 by press- ing , if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.49.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for an F-Code polling oper- ation and you want to keep this key programmed for an F-Code polling operation, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER. The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication ← /→ /Enter

3.43