Muratec MFX-1600, MFX-1200 manual Ring Pattern, Faxing/receiving first, then talking, Enter

To use DRD on your fax machine:

1	Contact your phone company to make sure it has set up DRD service for you. If
	possible, also find out which distinctive ring pattern the phone company has
	assigned you.
2	When your machine is MFX-1200; Press Program key, B, 2, 1, 4, ENTER.
	When your machine is MFX-1600; Press Program key, B, 2, 1, 5, ENTER.
	The LCD shows:
		DRD	:Off
		← /→	/Enter

3 Press or until the mode you want appears. Here, we ve chosen On.

	DRD	/→	:On
	←		/Enter
4 Press ENTER.
	Ring Pattern			:A
	←	/→	/Enter

5 Press or until the pattern you want appears. Here, we ve chosen C .

Ring Pattern	:C
← /→ /Enter

6 Press ENTER to set your machine to the displayed ring pattern.

Important: If your telephone company gives you only very general ring pattern specifications, or if you encounter a problem while using your machine s DRD feature, please try ALL of the listed ring patterns. If you still have a problem after trying all of the patterns, please call the Muratec Customer Support Center. (From the United States, call 800-347-3296.

Important: With your machine set for using DRD, it won t respond to any ring pat- tern other than the one you selected above. To reset the fax so it will respond once again to normal rings, repeat steps 2 4, above except, in step 3, toggle it to Off. Your fax will now respond normally.

Advanced features

Call request

You can send or receive a fax message and have a regular phone conversation on the same call (although, not at the same time). This is called a call request. It doesn t matter whether you re sending the fax or receiving it. You may fax first and then talk, or talk first and then fax.

Important: For this feature to work, the remote fax machine must have a similar call-request capability. Your machine must also have an optional handset attached.

Faxing/receiving first, then talking

To send or receive a fax first and then talk:

1	While your fax machine is sending or receiving the fax, press MONITOR/CALL.
2	At the remote fax machine, the ringer will sound after that machine receives
	each page.
3	If someone answers at the remote fax machine, your fax machine will ring
	several times. If so, pick up the optional handset. In a few seconds, the line

will open and you can begin your conversation.

Talking first, then sending a fax

To talk first and then send a fax:

1	When you ve finished your phone conversation, don t hang up.
2	Insert the document you want to fax.
3	Adjust the resolution and contrast if necessary.
4	Tell the person at the other fax machine to press START and to hang up
	his/her handset. Don t hang up your handset yet!
5	When you hear fax tones, press START and hang up your fax machine s
	optional handset. Your fax machine will send the document.

Talking first, then receiving a fax

To talk first and then receive a fax:

1	When you ve finished your phone conversation, don t hang up.
2	Tell the person at the other fax machine to press START and to hang up
	his/her handset. Don t hang up your handset yet!
3	When you hear fax tones, press START and hang up your machine s optional
	handset. Your machine will receive the document and print it out.

3.25