You cannot use the FBS glass for sorting multiple copies. Press COPY/FAX to change to Copy mode.
Make sure the sort setting is turned on. (See page 2.16.)
Press COPY/FAX to change to Copy mode.

Stacking multiple copies

1

2 Turn the sort setting off. (See page 2.16.) Note: The default setting of sorting is on.

3 Place your original document in ADF face up, or on the FBS glass face down just as you would to send a fax.

4 Enter the document size by pressing the DOCUMENT SIZE.

5 Using the numeric keypad to enter the number of copies you want (up to 99).

6 As needed, set the following:

Select document type and adjust image contrast Set copy reduction or enlargement ratio

Note: For details about each items, see Making copy settings, page 2.15.

7 Press START.

Note: To stop the copying, press STOP.

Sorting multiple copies (using ADF)

Note:

1

2

3 Placefax. your original document in ADF face up, just as you would to send a

4 Enter the document size by pressing the DOCUMENT SIZE.

5 Using the numeric keypad to enter the number of copies you want (up to 99).

6 As needed, set the following:

Select document type and adjust image contrast Set copy reduction ratio

Note: For details about each items, see Making the copy settings, page 2.15.

7 Press START.

Note: To stop the copying, press STOP.

Basic operation

Enlarged or reduced copies

Your fax machine is capable of enlargement and reduction when copying.

Note: The copy enlargement and reduction rate setting is available only for copy- ing, not for faxing.

Important: Copy enlargement is available only for copying using the FBS; it is not available for copying using the ADF.

1 Press COPY/FAX to change to Copy mode.

2 Place your original document in ADF face up, or on the FBS glass face down just as you would send a fax.

Note: If you want to enlarged copy, use FBS glass.

3 Enter the document size by pressing the DOCUMENT SIZE.

4 Choose an enlargement or reduction ratio using or of the cursor key. You can reduce to 78%, 64 % or 50 % of the original size

O R

You can enlarge to 129% or 200 %

O R

Press ZOOM to turn the ZOOM light on, and adjust the ratio at 1% steps using

or of the cursor key. You can enter the ratio between 50% and 200%.

O R

Directly enter any percentage between 50 % and 200 % by following proce- dure.

1.Press #.

2.Using the numeric key to enter your desired ratio (50 to 200).

3.Press # again.

129%: Half-letter (5.5

8.5) Letter (8.5

11)

78%: Legal (8.514)

Letter (8.511)

 

Helpful Tip: You can set the copy reduction or enlargement ratio to Auto . (See Setting copy auto, page 4.7.) If the Auto is set and you set the document size by pressing DOCUMENT SIZE, the machine automatically reduce or enlarge the original size (you entered) to fit on the paper size you selected.

5 As needed, set the following:

Select document type and adjust image contrast Enter the number of copies

6 Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

2.13

Page 31
Image 31
Muratec MFX-1600, MFX-1200 manual Stacking multiple copies, Sorting multiple copies using ADF, Enlarged or reduced copies