Lexmark MX710DHE, 24T7310, 237, 037 manual Timeouts, Error Recovery, Print Recovery

Understanding the printer menus		190
	Use	To
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255	continues to print other jobs in the print queue.
		Notes:
		• 30 is the factory default setting.
		• This menu item appears only when a formatted, working
		printer hard disk is installed.
	Error Recovery	Automatically reboot the printer back into the normal operation.
	Auto Reboot	Note: “Reboot when idle” is the factory default setting.
	Reboot when idle
	Reboot always
	Reboot never
	Error Recovery	Determine the number of automatic reboots the printer can
	Max Auto Reboots	perform.
	1–20	Note: 5 is the factory default setting.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when not resolved within the specified time period.
	Disabled	Note: Disabled is the factory default setting.
	5–255
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Set the printer to automatically check for jammed paper.
	Jam Assist	Note: On is the factory default setting.
	On
	Off
	Print Recovery	Let the printer successfully print a page that may not have printed
	Page Protect	otherwise.
	Off	Notes:
	On	• Off is the factory default setting. This prints a partial page
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.