Lexmark 037 Solving printer problems, Weblink server not set up. Contact system administrator

Troubleshooting 289

•Make sure the USB Buffer menu is not set to Disabled.

Weblink server not set up. Contact system administrator.

From the printer control panel, touch Continue to clear the message.

Note: If the message appears again, then contact your system support person.

Solving printer problems

•“Basic printer problems” on page 289

•“Hardware and internal option problems” on page 291

•“Paper feed problems” on page 294

Basic printer problems

The printer is not responding

Action	Yes	No
Step 1	Go to step 2.	Turn on the printer.
Make sure the printer is turned on.
Is the printer turned on?
Step 2	Press the Sleep button	Go to step 3.
Check if the printer is in Sleep mode or Hibernate mode.	to wake the printer
	from Sleep mode or
Is the printer in Sleep mode or Hibernate mode?	Hibernate mode.
Step 3	Go to step 4.	Plug one end of the
Check if one end of the power cord is plugged into the printer and the		power cord into the
other to a properly grounded electrical outlet.		printer and the other to
		a properly grounded
Is the power cord plugged into the printer and a properly grounded		electrical outlet.
electrical outlet?
Step 4	Unplug the other	Go to step 5.
Check other electrical equipment plugged into the electrical outlet.	electrical equipment,
	and then turn on the
Does other electrical equipment work?	printer. If the printer
	does not work, then
	reconnect the other
	electrical equipment.