Lexmark MX710DHE File Name, Custom Job Scanning, Scan Preview, Allow Save as Shortcut, Contrast

Understanding the printer menus		210
	Use	To
	File Name	Enter a base file name.
		Note: The limitation is 53 characters.
	Custom Job Scanning	Copy a document that contains mixed paper sizes into a single scan job.
	Off	Note: Off is the factory default setting.
	On
	Scan Preview	Specify whether a preview will appear on the display for scan jobs.
	On	Notes:
	Off
		• Off is the factory default setting.
		• This menu item appears only when a formatted, working printer hard disk is
		installed.
	Allow Save as Shortcut	Enable shortcut creation for FTP addresses.
	On	Note: On is the factory default setting.
	Off
	Background Removal	Adjust the amount of background visible on a copy.
	‑4 to 4	Note: 0 is the factory default setting.
	Contrast	Specify the contrast of the output.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	Scan edge to edge	Specify whether the original document is scanned edge-to-edge.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a scanned image.
	1–5	Note: 3 is the factory default setting.
	Temperature	Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
	‑4 to 4	output than the default while “warm” values generate a redder output than the
		default.