Lexmark 237, MX710DHE Reports Menu, Reports menu, Portrait Width, Portrait Height, Feed Direction

Understanding the printer menus		163
	Use	To
	Portrait Width	Set the portrait width.
	3–8.5 inches	Notes:
	76–216 mm
		• If the width exceeds the maximum, then the printer uses the
		maximum width allowed.
		• 8.5 inches is the US factory default setting. You can increase the
		width in 0.01‑inch increments.
		• 216 mm is the international factory default setting. You can increase
		the width in 1‑mm increments.
	Portrait Height	Set the portrait height.
	3–14.17 inches	Notes:
	76–360 mm
		• If the height exceeds the maximum, then the printer uses the
		maximum height allowed.
		• 14 inches is the US factory default setting. You can increase the
		height in 0.01‑inch increments.
		• 356 mm is the international factory default setting. You can increase
		the height in 1‑mm increments.
	Feed Direction	Specify the feed direction if the paper can be loaded in either direction.
	Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Reports Menu

Reports menu

Use	To
Menu Settings Page	Print a report containing information about the paper loaded in trays, installed
	memory, total page count, alarm settings, timeouts, printer control panel
	language, TCP/IP address, status of supplies, status of the network connection,
	and other information.
Device Statistics	Print a report containing printer statistics such as supply information and number
	of printed pages.
Network Setup Page	Print a report containing information about the network printer settings, such as
	the TCP/IP address information.
	Note: This menu item appears only in network printers or printers connected
	to print servers.
Network [x] Setup Page	Print a report containing information about the network settings of the printer,
	such as the TCP/IP address information.
	Note: This menu item appears only in network printers or printers connected
	to print servers, and when there is more than one network option installed.